DeviceErrors
Error codei61

AEG FSE76738P Error Code i61: Meaning, Fixes & Troubleshooting

AEGDishwasherFSE76738PUpdated Apr 16, 2026Confidence: medium
Quick fix

AEG FSE76738P error code i61 usually points to an internal electronics, sensor, or control fault. Try one full power reset, check for obvious installation or supply issues if they apply, and book service if the code returns.

Jump to the quick fix
Why this page is worth trusting

This route is designed to keep the next step obvious: confirm the code, use the decision tree when available, and branch back to the model hub if the display does not match.

Source backing
No explicit source list is attached to this row yet.
FSE76738P hub
Return to the device hub when you need the full code directory, common themes, or shared support links for this model.
Open model hub
Keep moving
Compare nearby codes if the display is similar, or use the decision tree to narrow the diagnosis without leaving this page.
Compare related codes
SeverityMedium
DifficultyVery easy
DIY-safe (general)
Time~10 min / ~25 min
Quick fix · Full checks

Summary

AEG FSE76738P error code i61 indicates an electronics, control-board, sensor, or related service fault. This guide explains the safest first checks, what the code usually points to, and when repair is the practical next step.

Fix it fast

  1. Switch the dishwasher off and isolate power for at least 60 seconds.
  2. Restart the machine and run a new cycle only once to see whether the fault clears.
  3. If the same code returns, record it and plan for service instead of repeated resets.

What i61 means

i61 usually points to a control-board, relay, sensor, flowmeter, dispenser, or internal communication issue rather than a simple user-maintenance problem.

Most likely causes

  • Main control board, relay, or internal electronics fault.
  • Sensor or measurement fault such as a flowmeter, temperature sensor, or water detection circuit.
  • Power-supply or wiring issue affecting correct operation.

Safety warnings

  • Do not dismantle electronic modules or internal wiring unless you are qualified.
  • If the machine trips power or behaves unpredictably, stop using it until it is inspected.

When to contact support

Persistent i61 faults usually need diagnosis and possibly parts. Arrange service if the code returns after one proper reset or if it is linked to control-board, sensor, or power-supply faults.

What to record before AEG support or repair

  1. Photograph the full display and the product label or rating plate.
    ExpectedYou can confirm the exact model and avoid support or parts quotes against the wrong product variant.
  2. Note whether the appliance was idle, starting up, heating, filling, draining, cooling, or finishing a cycle when the code appeared.
    ExpectedYou have the timing detail that usually matters most in fault triage.
  3. Write down any recent changes such as a power interruption, filter clean, leak, unusual noise, smell, moved installation, or repeated manual reset attempts.
    ExpectedSupport can separate a recent event from a longer-running repeat fault faster.

Next actions if i61 keeps coming back

If i61 returns after one clean restart and the user-accessible checks above, treat that as a repeat fault. The safest next move is to compare the model hub, confirm the official manual-safe checks for this device, and then escalate with a clear symptom record instead of opening panels or replacing parts blind.