DeviceErrors
Error codeF30

Fisher & Paykel DW60FC6 Error Code F30: Meaning, Fixes & Troubleshooting

Fisher & PaykelDishwasherDW60FC6Updated Apr 16, 2026Confidence: medium
Quick fix

Fisher & Paykel DW60FC6 code F30 usually means the dishwasher detected leaking, overfilling, or water where it should not be. Turn the appliance off, check for visible water, and avoid repeated restarts until the cause is understood.

Jump to the quick fix
SeverityMedium
DifficultyEasy
DIY-safe (general)
Time~10 min / ~25 min
Quick fix · Full checks

Summary

Fisher & Paykel DW60FC6 error code F30 means flooding (flood switch activated). This guide explains the likely causes, the safest first checks, and when support or service is the better next step.

Fix it fast

  1. Turn the appliance off and isolate power immediately.
  2. Check for visible water around hoses, seals, trays, or the surrounding floor area.
  3. Do not restart the appliance until the leak or overflow cause has been checked.

What F30 means

Flooding (flood switch activated). On the Fisher & Paykel DW60FC6, this code relates to the dishwasher and should be interpreted together with how the appliance is behaving right now.

Common symptoms

  • The dishwasher displays F30 instead of normal status information.
  • The current cycle, function, or startup sequence may stop, pause, or behave differently than expected.
  • The same code may return after a reset if the underlying issue is still present.

Most likely causes

  • A real leak, overfill condition, or water collection in a safety tray or base.
  • A hose, seal, valve, or level-control problem allowing water into the wrong area.

Deeper checks before service

  1. Look for recent installation, transport, or plumbing changes that could have disturbed seals or hoses.
  2. Check whether the code appeared after oversudsing, incorrect detergent use, or overfilling.
  3. If the same code returns after drying out, the underlying leak source still needs repair.

Safety warnings

  • Water and mains electricity are a serious risk together, so isolate power before inspecting anything.

When to contact support

Arrange service immediately if F30 is linked to active leaking, repeated flooding, or visible hose, valve, or seal damage.

FAQ

Can F30 clear after a reset?
Sometimes a temporary glitch clears after one full reset, but a repeated return usually means the same underlying issue is still there.
Should I keep using the appliance if it works again briefly?
Only if the code stays away and the appliance behaves normally. If the same code comes back, stop and move to service or more targeted diagnosis.

What to record before Fisher & Paykel support or repair

  1. Photograph the full display and the product label or rating plate.
    ExpectedYou can confirm the exact model and avoid support or parts quotes against the wrong product variant.
  2. Note whether the appliance was idle, starting up, heating, filling, draining, cooling, or finishing a cycle when the code appeared.
    ExpectedYou have the timing detail that usually matters most in fault triage.
  3. Write down any recent changes such as a power interruption, filter clean, leak, unusual noise, smell, moved installation, or repeated manual reset attempts.
    ExpectedSupport can separate a recent event from a longer-running repeat fault faster.

Next actions if F30 keeps coming back

If F30 returns after one clean restart and the user-accessible checks above, treat that as a repeat fault. The safest next move is to compare the model hub, confirm the official manual-safe checks for this device, and then escalate with a clear symptom record instead of opening panels or replacing parts blind.