DeviceErrors
Error code8-1 OR F8E1

Kenmore 665.12764K310 Error Code 8-1 OR F8E1: Meaning, Fixes & Troubleshooting

KenmoreDishwasher665.12764K310Kenmore Elite 2013 Stainless Steel Tall TubUpdated Apr 16, 2026Confidence: medium
Quick fix

Kenmore 665.12764K310 code 8-1 OR F8E1 usually means the dishwasher cannot drain correctly. Start with the filter or drain path, check hoses for kinks or blockages, and then retest the appliance.

Jump to the quick fix
SeverityLow
DifficultyEasy
DIY-safe (general)
Time~10 min / ~25 min
Quick fix · Full checks

Summary

Kenmore 665.12764K310 error code 8-1 OR F8E1 means slow drain. This guide explains the likely causes, the safest first checks, and when support or service is the better next step.

Fix it fast

  1. Clean the accessible filter and remove trapped debris from the drain area.
  2. Check the drain hose or outlet path for kinks, crushing, or blockages.
  3. Run a short cycle and confirm the appliance empties fully.

What 8-1 OR F8E1 means

Slow drain. On the Kenmore 665.12764K310, this code relates to the dishwasher and should be interpreted together with how the appliance is behaving right now.

Common symptoms

  • The dishwasher displays 8-1 OR F8E1 instead of normal status information.
  • The current cycle, function, or startup sequence may stop, pause, or behave differently than expected.
  • The same code may return after a reset if the underlying issue is still present.

Most likely causes

  • Drain filter, sump, or outlet path is blocked.
  • Drain hose is kinked, crushed, or blocked, or the pump cannot clear the water properly.

Deeper checks before service

  1. Check whether the fault started after installation or after reconnecting the drain line.
  2. Make sure the waste connection is open and routed correctly.
  3. If the code returns after clearing the drain path, the pump or related control circuit may need service.

Safety warnings

  • Isolate power before reaching into pump or filter areas.

When to contact support

Book service if 8-1 OR F8E1 returns after cleaning the drain path, or if the pump sounds abnormal and the dishwasher still cannot empty correctly.

FAQ

Can 8-1 OR F8E1 clear after a reset?
Sometimes a temporary glitch clears after one full reset, but a repeated return usually means the same underlying issue is still there.
Should I keep using the appliance if it works again briefly?
Only if the code stays away and the appliance behaves normally. If the same code comes back, stop and move to service or more targeted diagnosis.

Sources