DeviceErrors
Error code2

Kuppersbusch IGV 699.3 Error Code 2: Meaning, Fixes & Troubleshooting

KuppersbuschDishwasherIGV 699.3Baureihe 635Updated Apr 16, 2026Confidence: medium
Quick fix

Kuppersbusch IGV 699.3 error code 2 often points to a heater, heat-pump, or drying-system problem. Clean the filters first, make sure there is no obvious blockage, power-reset the machine once, and then arrange service if the fault returns.

Jump to the quick fix
SeverityMedium
DifficultyVery easy
DIY-safe (general)
Time~10 min / ~25 min
Quick fix · Full checks

Summary

Kuppersbusch IGV 699.3 error code 2 indicates a heater, heat-pump, drying, or related circulation fault. This guide explains the likely causes, the limited homeowner checks that are still worth trying, and when professional repair is the safer next step.

Fix it fast

  1. Clean the filter system thoroughly before trying anything else.
  2. Power the dishwasher off for 60 seconds, then restart it once.
  3. Run a fresh cycle and note whether the fault appears during wash, heating, or drying.

What 2 means

2 usually points to the heating, circulation, heat-pump, or drying side of the dishwasher. These faults can sometimes be worsened by limescale, blocked filters, or restricted water movement, but many persistent cases need service.

Most likely causes

  • Heat-pump, heater, or drying-system component fault.
  • Restricted water circulation because of filters, limescale, or blockages.
  • Sensor or control issue affecting heat or drying functions.

What not to do

  • Do not dismantle heater or heat-pump parts unless you are qualified to do so.
  • Do not keep forcing full cycles if the same heating fault comes back immediately.

When to contact support

Book service if 2 returns after a filter clean and one proper reset, because persistent heat-pump, heater, Zeolite, or drying faults usually need diagnosis and parts.

Sources