DeviceErrors
Error codeCL E

LG LB26H2200S Error Code CL E: Meaning, Fixes & Troubleshooting

LGRefrigeratorLB26H2200SUpdated Apr 16, 2026Confidence: medium
Quick fix

LG LB26H2200S code CL E usually means the refrigerator detected leaking, overfilling, or water where it should not be. Turn the appliance off, check for visible water, and avoid repeated restarts until the cause is understood.

Jump to the quick fix
Why this page is worth trusting

This answer is route-specific, not just a generic code stub. It is backed by 1 sources and keeps the next route obvious if this exact code is not the right match.

Source backing
1 sources
Jump to sources
LB26H2200S hub
Return to the device hub when you need the full code directory, common themes, or shared support links for this model.
Open model hub
Keep moving
Compare nearby codes if the display is similar, or use the decision tree to narrow the diagnosis without leaving this page.
Compare related codes
SeverityMedium
DifficultyEasy
DIY-safe (general)
Time~10 min / ~25 min
Quick fix · Full checks

Summary

LG LB26H2200S error code CL E means low side refrigerant leak. This guide explains the likely causes, the safest first checks, and when support or service is the better next step.

Fix it fast

  1. Turn the appliance off and isolate power immediately.
  2. Check for visible water around hoses, seals, trays, or the surrounding floor area.
  3. Do not restart the appliance until the leak or overflow cause has been checked.

What CL E means

Low side refrigerant leak. On the LG LB26H2200S, this code relates to the refrigerator and should be interpreted together with how the appliance is behaving right now.

Common symptoms

  • The refrigerator displays CL E instead of normal status information.
  • The current cycle, function, or startup sequence may stop, pause, or behave differently than expected.
  • The same code may return after a reset if the underlying issue is still present.

Most likely causes

  • A real leak, overfill condition, or water collection in a safety tray or base.
  • A hose, seal, valve, or level-control problem allowing water into the wrong area.

Deeper checks before service

  1. Look for recent installation, transport, or plumbing changes that could have disturbed seals or hoses.
  2. Check whether the code appeared after oversudsing, incorrect detergent use, or overfilling.
  3. If the same code returns after drying out, the underlying leak source still needs repair.

Safety warnings

  • Water and mains electricity are a serious risk together, so isolate power before inspecting anything.

When to contact support

Arrange service immediately if CL E is linked to active leaking, repeated flooding, or visible hose, valve, or seal damage.

FAQ

Can CL E clear after a reset?
Sometimes a temporary glitch clears after one full reset, but a repeated return usually means the same underlying issue is still there.
Should I keep using the appliance if it works again briefly?
Only if the code stays away and the appliance behaves normally. If the same code comes back, stop and move to service or more targeted diagnosis.

What to record before LG support or repair

  1. Photograph the full display and the product label or rating plate.
    ExpectedYou can confirm the exact model and avoid support or parts quotes against the wrong product variant.
  2. Note whether the appliance was idle, starting up, heating, filling, draining, cooling, or finishing a cycle when the code appeared.
    ExpectedYou have the timing detail that usually matters most in fault triage.
  3. Write down any recent changes such as a power interruption, filter clean, leak, unusual noise, smell, moved installation, or repeated manual reset attempts.
    ExpectedSupport can separate a recent event from a longer-running repeat fault faster.

Next actions if CL E keeps coming back

If CL E returns after one clean restart and the user-accessible checks above, treat that as a repeat fault. The safest next move is to compare the model hub, confirm the official manual-safe checks for this device, and then escalate with a clear symptom record instead of opening panels or replacing parts blind.

Sources