DeviceErrors
Error codeTHE DISPLAYS FLASH

Siemens EX675FEC1E/02 Error Code THE DISPLAYS FLASH: Meaning, Fixes & Troubleshooting

SiemensCooktop/HobEX675FEC1E/02Updated Apr 16, 2026Confidence: medium
Quick fix

Siemens EX675FEC1E/02 code THE DISPLAYS FLASH indicates The control panel is damp or an object is covering it Start with one full power reset and the obvious user-safe checks, then arrange service if the same code returns.

Jump to the quick fix
Why this page is worth trusting

This answer is route-specific, not just a generic code stub. It is backed by 1 sources and keeps the next route obvious if this exact code is not the right match.

Source backing
1 sources
Jump to sources
EX675FEC1E/02 hub
Return to the device hub when you need the full code directory, common themes, or shared support links for this model.
Open model hub
Keep moving
Use the decision tree when available, or jump back to search if the display and symptom do not line up cleanly.
Search this model
SeverityMedium
DifficultyVery easy
DIY-safe (general)
Time~10 min / ~25 min
Quick fix · Full checks

Summary

Siemens EX675FEC1E/02 error code THE DISPLAYS FLASH means the control panel is damp or an object is covering it. This guide explains the likely causes, the safest first checks, and when support or service is the better next step.

Fix it fast

  1. Power-reset the appliance once for at least 60 seconds.
  2. Check the basic user-accessible items linked to the fault such as filters, fitment, supply, or visible obstructions.
  3. Retest once and note exactly when the code returns.

What THE DISPLAYS FLASH means

The control panel is damp or an object is covering it. On the Siemens EX675FEC1E/02, this code relates to the cooktop/hob and should be interpreted together with how the appliance is behaving right now.

Common symptoms

  • The cooktop/hob displays THE DISPLAYS FLASH instead of normal status information.
  • The current cycle, function, or startup sequence may stop, pause, or behave differently than expected.
  • The same code may return after a reset if the underlying issue is still present.

Most likely causes

  • The cooktop/hob detected The control panel is damp or an object is covering it.
  • The underlying cause may involve sensors, controls, wiring, moving parts, or appliance-specific hardware.

Deeper checks before service

  1. Record the full code, appliance model, and the stage of operation when the fault appears.
  2. Think back to recent cleaning, moving, installation, software, or electrical changes before the issue began.
  3. If the code returns after the basic checks, the next step is usually a proper service diagnosis.

Safety warnings

  • Do not keep forcing resets or repeated cycles if the same code returns immediately.

When to contact support

Book service if THE DISPLAYS FLASH returns after one proper reset and the basic safe checks, because the cooktop/hob likely needs model-specific diagnosis.

FAQ

Can THE DISPLAYS FLASH clear after a reset?
Sometimes a temporary glitch clears after one full reset, but a repeated return usually means the same underlying issue is still there.
Should I keep using the appliance if it works again briefly?
Only if the code stays away and the appliance behaves normally. If the same code comes back, stop and move to service or more targeted diagnosis.

What to record before Siemens support or repair

  1. Photograph the full display and the product label or rating plate.
    ExpectedYou can confirm the exact model and avoid support or parts quotes against the wrong product variant.
  2. Note whether the appliance was idle, starting up, heating, filling, draining, cooling, or finishing a cycle when the code appeared.
    ExpectedYou have the timing detail that usually matters most in fault triage.
  3. Write down any recent changes such as a power interruption, filter clean, leak, unusual noise, smell, moved installation, or repeated manual reset attempts.
    ExpectedSupport can separate a recent event from a longer-running repeat fault faster.

Next actions if THE DISPLAYS FLASH keeps coming back

If THE DISPLAYS FLASH returns after one clean restart and the user-accessible checks above, treat that as a repeat fault. The safest next move is to compare the model hub, confirm the official manual-safe checks for this device, and then escalate with a clear symptom record instead of opening panels or replacing parts blind.

Sources